AI.IX.A.S1
SkillClear the area.
From the FAA library
- Chapter 7: Ground Reference Maneuvers › Maneuvering by Reference to Ground Objects
should consider engine failure and have one or more locations available for an emergency landing. Pilots should always clear the area with two 90° clearing turns looking to the left and the right, as well as above and below ... pilot should complete the required checklist items, make any radio announcements (such as on a practice area frequency), and safety clearing turns. As a general note, a ground reference maneuver should not exceed a bank angle…
- Chapter 10: Performance Maneuvers › Steep Turns
reduced, as necessary, to maintain the altitude and airspeed. Common errors when performing steep turns are: 1. Not clearing the area 2. Inadequate pitch control on entry or rollout 3. Gaining or losing altitude 4. Failure to maintain constant bank…
- Chapter 5: Maintaining Aircraft Control: Upset Prevention and Recovery Training › Slow Flight › Maneuvering in Slow Flight
retracted to avoid a stall. Common errors in the performance of slow flight are: 1. Failure to adequately clear the area 2. Inadequate back-elevator pressure as power is reduced, resulting in altitude loss 3. Excessive back-elevator pressure…
- Chapter 5: Maintaining Aircraft Control: Upset Prevention and Recovery Training › Slow Flight › Performing the Slow Flight Maneuver
ground for recovery should the airplane inadvertently stall. To begin the slow flight maneuver, the pilot should clear the area and gradually reduce thrust from cruise power and adjust the pitch to allow the airspeed to decrease while maintaining altitude…
- Chapter 3: The Learning Process › Domains of Learning › Cognitive Domain
explain the procedure for entering a level, left turn to Beverly. The procedure includes several steps: (1) visually clear the area, (2) add a slight amount of power to maintain airspeed, (3) apply aileron control pressure to the left…
- Chapter 9: Basic Flight Maneuvers › Hovering—Rearward Flight › Technique
Failure to maintain desired hovering height. 4. Failure to maintain proper rpm. 5. Failure to make sure the area is clear prior to starting the maneuver. Hovering—Rearward Flight Rearward hovering flight may be necessary to move the helicopter ... groundspeed, altitude, and heading. Due to the limited visibility behind a helicopter, it is important that the area behind the helicopter be cleared before beginning the maneuver. Use of ground personnel is recommended. Technique Before starting rearward hovering flight, pick…