Tutor Platform

AI.IX.C.K2a

Knowledge

Aerodynamics associated with chandelles, including:

Maintaining coordinated flight

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 10: Performance Maneuvers › Chandelle

    decreases, right rudder pressure is progressively increased to ensure that the airplane remains in coordinated flight. The pilot maintains coordinated flight by sensing physical slipping or skidding, by glancing at the ball in the turn-and-slip or turn coordinator…

  • Chapter 5: Maintaining Aircraft Control: Upset Prevention and Recovery Training › Stalls › Fundamentals of Stall Recovery

    next step is rolling the wings level followed by the addition of power as needed all while maintaining coordinated flight. If the airplane is not equipped with speedbrakes or spoilers, this step is also skipped. Returning to the desired flightpath ... reduction of AOA until the stall warning is eliminated. The pilot would then roll wings level while maintaining coordinated flight. Since there is no power to add, this step would not apply. Retracting speedbrakes or spoilers would be the next…

  • Chapter 9: Techniques of Flight Instruction › The Telling-and-Doing Technique › Instructor Tells—Instructor Does

    monitor the flight instruments. ⦁ After clearing the airspace around the aircraft, add power slightly, turn the aircraft in the desired direction, and apply a slight amount of back pressure on the yoke to maintain altitude. Maintain coordinated flight by applying…

  • Chapter 5: Maintaining Aircraft Control: Upset Prevention and Recovery Training › Slow Flight › Maneuvering in Slow Flight

    coordinated flight. The closer the airplane is to the 1G stall, the greater the amount of right rudder pressure required. Figure 5-7. Slow flight—low airspeed, high angle of attack, high power, and constant altitude. Maneuvering in Slow Flight ... When the desired pitch attitude and airspeed have been established in straight-and-level slow flight, the pilot needs to maintain awareness of outside references and continually cross-check the airplane’s instruments to maintain control. The pilot should note…

  • Chapter 3: Basic Flight Maneuvers › Level Turns

    differential lift and the engine/propeller. The rudder does not turn the airplane. The rudder is used to maintain coordinated flight. For purposes of this discussion, turns are divided into three classes: shallow, medium, and steep. ⦁ Shallow turns—bank angle ... slowly levels the wings unless aileron pressure in the desired direction of bank is held by the pilot to maintain the bank angle. ⦁ Medium turns—result from a degree of bank between approximately 20° and 45°. At medium bank angles…

  • Chapter 7, Section I: Airplane Basic Flight Maneuvers › Pitch › Trim Technique

    pressures to establish a desired attitude, then adjusting the trim so the aircraft maintains that attitude when the flight controls are released. Trim the aircraft for coordinated flight by centering the ball of the turn-and-slip indicator, by using ... aircraft is an additional factor affecting coordinated flight. Use balanced power or thrust, when possible, to aid in maintaining coordinated flight. Changes in attitude, power, or configuration requires a trim adjustment in most cases. Using trim alone to establish…