Flight Instructor for Airplane Category › VII. Takeoffs, Landings, and Go-Arounds › Task F. Short-Field Approach and Landing (ASEL, AMEL)

AI.VII.F.R3a

Risk management

Planning for:

Rejected landing and go-around

Practice questions Ask the tutor

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Airplane Flying Handbook p. 9-10
Chapter 9: Approaches and Landings › Go-Arounds (Rejected Landings)
Go-Arounds (Rejected Landings) A go-around is a normal maneuver that is used when approach and landing parameters deviate from expectations or when it is hazardous to continue. Situations such as air traffic control (ATC) requirements, unexpected appearance…
Airplane Flying Handbook p. 9-11
Chapter 9: Approaches and Landings › Go-Arounds (Rejected Landings) › Configuration
Configuration After establishing the proper climb attitude and power settings, the pilot…
Airplane Flying Handbook p. 9-12
Chapter 9: Approaches and Landings › Go-Arounds (Rejected Landings) › Ground Effect
Ground Effect Ground effect is a factor in every landing and every…
Airplane Flying Handbook p. 9-11
Chapter 9: Approaches and Landings › Go-Arounds (Rejected Landings) › Attitude
The pilot should resist any impulse to pitch-up for a climb…
Airplane Flying Handbook p. 9-11
Chapter 9: Approaches and Landings › Go-Arounds (Rejected Landings) › Power
The proper execution of a go-around maneuver includes three cardinal principles…
Airplane Flying Handbook p. 5-15
Index
Power-on Function of flaps Fundamentals of stall recovery Gas turbine engine Glides Gliding turns Go-around Rejected landings Attitude Configuration Ground effect Power Ground loop Ground operation H Hand propping Hard landing High final approach High-performance airplane High…