AI.VII.K.R1
Risk managementSelection of takeoff path based on pilot capability, airplane performance and limitations, available distance, and wind.
From the FAA library
- Chapter 11: Aircraft Performance › Takeoff and Landing Performance › Takeoff Performance
Figure 11-19 illustrates the general effect of wind by the percent change in takeoff or landing distance as a function of the ratio of wind velocity to takeoff or landing speed. The effect of proper takeoff speed is especially ... important when runway lengths and takeoff distances are critical. The takeoff speeds specified in the AFM/POH are generally the minimum safe speeds at which the aircraft can become airborne. Any attempt to take off below the recommended speed means that…
- TAKEOFFS
TAKEOFFS Since skiplanes operate from a variety of surfaces, it is important to remember that many takeoff areas can contain unforeseen hazards; therefore, it is important to always plan for the unexpected. If the condition of the takeoff path ... unknown, walk or taxi the full length of the takeoff area and back to check the surface for hazards and help pack the snow. It is better to discover any irregularities before attempting a takeoff than to encounter them…
- PERFORMANCE CONSIDERATIONS FOR TAKEOFF, CLIMB, CRUISE, AND LANDING › TAKEOFF
create substantial CG changes as the seaplane is brought onto the step or rotated into a climb attitude. Some pilots use float compartments near the CG to stow iced fish or game from hunting expeditions. It is imperative to adhere ... manufacturer’s weight and balance limitations and to include the weight and moment of float compartment contents in weight and balance calculations. Density altitude is a very important factor in seaplane takeoff performance. High altitudes, high temperatures, high humidity…
- Chapter 6: Takeoffs and Departure Climbs › Short-Field Takeoff and Maximum Performance Climb
runway is long enough or if no obstacles exist, ground effect can be used to the pilot’s advantage by using the reduced drag to improve initial acceleration. When taking off from an unsatisfactory surface, the pilot should apply ... ground run and lift-off, using ground effect as an aid, prior to attaining true flying speed. The pilot should reduce AOA to attain normal airspeed before attempting to fly out of the ground effect areas. Short-Field Takeoff…