AI.XI.A.R1
Risk managementInstrument flying hazards, including failure to maintain visual flight rules (VFR), spatial disorientation, loss of control, fatigue, stress, and emergency off airport landings.
From the FAA library
- Chapter 8: Helicopter Attitude Instrument Flying › Turn Indicator › Power Control During Straight-and-Level Flight
airspeed is changing, adjust the pitch attitude to maintain a constant altitude. A constant heading should be maintained throughout the change. As the desired airspeed is approached, adjust power to the new cruising power setting and further adjust pitch attitude ... maintain altitude. The instrument indications for straight-and-level flight at normal cruise and during the transition from normal cruise to slow cruise are illustrated in Figures 8-9 and 8-10. After the airspeed stabilizes at slow cruise…
- Chapter 3: Basic Flight Maneuvers › Straight-and-Level Flight › Straight Flight
Straight Flight Maintaining a constant direction or heading is accomplished by visually checking the relationship of the airplane’s wingtips to the natural horizon. Depending on whether the airplane is a high wing or low wing, both wingtips should ... pilot should understand that anytime the wings are banked, the airplane turns. The objective of straight flight is to detect and correct small deviations, necessitating minor flight control corrections. The bank attitude information can also be obtained from a quick…
- Chapter 1: Introduction to Flight Training › Safety Considerations › Use of Checklists
Preflight inspection ⦁ Before engine start ⦁ Engine starting ⦁ Before taxiing ⦁ Before takeoff ⦁ After takeoff ⦁ Cruise ⦁ Descent ⦁ Before landing ⦁ After landing ⦁ Engine shutdown and securing Figure 1-17. A sample checklist used by pilots. During flight training, there should be a clear ... understanding between the learner and flight instructor of who has control of the aircraft. Prior to any flight, a briefing should be conducted that includes the procedures for the exchange of flight controls. The following three-step process…
- Chapter 6: Flight Controls › Flight Control Systems › Primary Flight Controls
Flight Control Systems Flight Controls Aircraft flight control systems consist of primary and secondary systems. The ailerons, elevator (or stabilator), and rudder constitute the primary control system and are required to control an aircraft safely during flight. Wing flaps, leading ... edge devices, spoilers, and trim systems constitute the secondary control system and improve the performance characteristics of the airplane or relieve the pilot of excessive control forces. Primary Flight Controls Aircraft control systems are carefully designed to provide adequate responsiveness…
- Chapter 3: Basic Flight Maneuvers › Integrated Flight Instruction
first several hours of instruction, flight instructors may choose to use flight instrument covers to develop a beginning pilot’s skill or to correct a pilot’s poor habit of fixating on instruments by forcing them to use outside visual ... references for aircraft control. The beginning pilot, not being familiar with the intricacies of flight by references to instruments, including such things as instrument lag and gyroscopic precession, will invariably make excessive attitude corrections and end up “chasing the instruments…
- Chapter 10: IFR Flight › IFR Flight Plan › Cancelling IFR Flight Plans
Cancelling IFR Flight Plans An IFR flight plan may be cancelled any time a pilot is operating in VFR conditions outside Class A airspace by stating “cancel my IFR flight plan” to the controller or air-toground station. After cancelling ... flight plan, the pilot should change to the appropriate air-to-ground frequency, transponder code as directed, and VFR altitude/flight level. ATC separation and information services (including radar services, where applicable) are discontinued when an IFR flight plan is cancelled…