AI.XIII.A.S3
SkillUse flight controls in the proper combination as recommended by the manufacturer, or as required to maintain best performance, and trim as required.
From the FAA library
- Chapter 6: Flight Controls › Flight Control Systems › Primary Flight Controls
Flight Control Systems Flight Controls Aircraft flight control systems consist of primary and secondary systems. The ailerons, elevator (or stabilator), and rudder constitute the primary control system and are required to control an aircraft safely during flight. Wing flaps, leading ... edge devices, spoilers, and trim systems constitute the secondary control system and improve the performance characteristics of the airplane or relieve the pilot of excessive control forces. Primary Flight Controls Aircraft control systems are carefully designed to provide adequate responsiveness…
- Chapter 9: Techniques of Flight Instruction › Positive Exchange of Flight Controls › Procedure
Procedure During flight training, there should always be a clear understanding between learners and flight instructors about who has control of the aircraft. The preflight briefing should include procedures for the exchange of flight controls. A positive three-step process ... exchange of flight controls between pilots is a proven procedure and one that is strongly recommended. When an instructor is teaching a maneuver to a learner, the instructor normally demonstrates the maneuver first, then has the learner follow along…
- Chapter 1: Introduction to Flight Training › Safety Considerations › Use of Checklists
Descent ⦁ Before landing ⦁ After landing ⦁ Engine shutdown and securing Figure 1-17. A sample checklist used by pilots. During flight training, there should be a clear understanding between the learner and flight instructor of who has control of the aircraft ... Prior to any flight, a briefing should be conducted that includes the procedures for the exchange of flight controls. The following three-step process for the exchange of flight controls is highly recommended. When a flight instructor wishes the learner…
- Chapter 3: Basic Flight Maneuvers › Straight-and-Level Flight › Straight Flight
Straight Flight Maintaining a constant direction or heading is accomplished by visually checking the relationship of the airplane’s wingtips to the natural horizon. Depending on whether the airplane is a high wing or low wing, both wingtips should ... pilot should understand that anytime the wings are banked, the airplane turns. The objective of straight flight is to detect and correct small deviations, necessitating minor flight control corrections. The bank attitude information can also be obtained from a quick…
- Chapter 3: Basic Flight Maneuvers › Trim Control
then hold the wings level with aileron flight control pressure while rudder control pressure is trimmed out. Finally, aileron trim should be adjusted to relieve any aileron flight control pressure. A properly trimmed airplane is an indication of good piloting ... skills. Any control forces that the pilot feels should be a result of deliberate flight control pressure inputs during a planned change in airplane attitude, not a result of forces being applied by the airplane. A common trim control error…
- Chapter 9: Techniques of Flight Instruction › Postflight Evaluation › First Solo Flight
First Solo Flight During the learner’s first solo flight, the instructor needs to be present to assist in answering questions or resolving any issues that arise during the flight. To ensure the solo flight is a positive, confidence-building ... experience for the learner, the flight instructor needs to consider time of day when scheduling the flight. Time of day is a factor in traffic congestion, possible winds, sun angles, and reflection. If possible, the flight instructor needs access…