Tutor Platform
Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 17: Aeromedical Factors › Ground Lighting Illusions › Exposure to Chemicals

    Chemicals When conducting preflight and post-flight inspections, pilots must verify that the fluid levels in their aircraft meet the levels specified for safe operations as stated in the Pilot's Operating Handbook. These fluids include, but are not limited…

  • Chapter 3: Identifying Hazards & Associated Risks › Leading Accident Causes › Identifying Hazards

    pilot who can see terrain can maneuver to avoid it. • Preflight Planning–Many hazards can be detected through preflight planning. Weather briefings identify hazards. Aircraft performance calculations, preflight inspections, and other routine procedures may identify hazards. • On-board Equipment ... traffic, airspace activity, and other hazards. • Postflight Inspections–Inspecting the aircraft following the completion of a flight may identify aircraft hazards before the next person flies the aircraft. Common items include condition of tires and brakes, security of access panels…

  • 14 CFR § 91.1101 Pilots: Initial, transition, and upgrade ground training.

    expected to adhere to the aircraft), if the program manager expects to authorize takeoffs in ground icing conditions, including: (A) The use of holdover times when using deicing/anti-icing fluids; (B) Airplane deicing/anti-icing procedures, including inspection and check procedures and responsibilities ... Cold weather preflight inspection procedures; (G) Techniques for recognizing contamination on the airplane; (7) Operating limitations; (8) Fuel consumption and cruise control; (9) Flight planning; (10) Each normal and emergency procedure; and (11) The approved Aircraft Flight Manual or equivalent…

  • 14 CFR § 61.87 Solo requirements for student pilots.

    maneuvers and procedures: (1) Proper flight preparation procedures, including preflight planning, preparation, aircraft systems, and, if appropriate, powerplant operations; (2) Taxiing or surface operations, including runups, if applicable; (3) Launches, including normal and crosswind; (4) Straight and level flight ... turns in both directions, if applicable; (5) Airport traffic patterns, including entry procedures; (6) Collision avoidance, windshear avoidance, and wake turbulence avoidance; (7) Descents with and without turns using high and low drag configurations; (8) Flight at various airspeeds…

  • 14 CFR § 135.345 Pilots: Initial, transition, and upgrade ground training.

    ground icing conditions, including: (A) The use of holdover times when using deicing/anti-icing fluids; (B) Airplane deicing/anti-icing procedures, including inspection and check procedures and responsibilities; (C) Communications; (D) Airplane surface contamination (i.e., adherence of frost, ice, or snow) and critical ... Cold weather preflight inspection procedures; (G) Techniques for recognizing contamination on the airplane; (7) Operating limitations; (8) Fuel consumption and cruise control; (9) Flight planning; (10) Each normal and emergency procedure; and (11) The approved Aircraft Flight Manual, or equivalent…

  • Chapter 9: Flight Manuals and Other Documents › Placards › Performance (Section 5)

    with a list of the airspeeds for normal operations. The next area consists of several checklists that may include preflight inspection, before starting procedures, starting engine, before taxiing, taxiing, before takeoff, climb, cruise, descent, before landing, balked landing, after landing ... Performance section contains all the information required by the aircraft certification regulations and any additional performance information the manufacturer deems important to pilot ability to safely operate the aircraft. Performance charts, tables, and graphs vary in style, but all contain…