Tutor Platform

AP.V.D.S5

Skill

Recognize if any flight instrumentation is inaccurate or inoperative, and take appropriate action.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 1: Departure Procedures › ODP Flight Planning Considerations

    time, any of which would require an alteration in the flight plan and initial headings. Considering the forecast weather, departure runways, and existing ODP, plan the flight route, climb performance, and fuel burn accordingly to compensate for the departure procedure ... Obstacle) Departure Procedures section, it may require the pilot to take action to avoid these obstacles. Consideration must be given to decreased climb performance from an inoperative engine or to the amount of runway used for takeoff. Aircraft requiring…

  • 14 CFR § 91.109 Flight instruction; Simulated instrument flight and certain flight tests.

    Flight instruction; Simulated instrument flight and certain flight tests. (c) No person may operate a civil aircraft in simulated instrument flight unless— (1) The other control seat is occupied by a safety pilot who possesses at least: (i) A private ... pilot certificate with category and class ratings appropriate to the aircraft being flown; or (ii) For purposes of providing training for a solo cross-country endorsement under § 61.93 of this chapter, a flight instructor certificate with an appropriate sport pilot…

  • 14 CFR § 91.1069 Flight crew: Instrument proficiency check requirements.

    Flight crew: Instrument proficiency check requirements. The instrument approach procedure or procedures must include at least one straight-in approach, one circling approach, and one missed approach. Each type of approach procedure demonstrated must be conducted to published minimums ... that procedure. (d) The instrument proficiency checks required by paragraphs (a) and (b) of this section consists of either an oral or written equipment test (or a combination) and a flight check under simulated or actual IFR conditions. The equipment…

  • Pilot/Controller Glossary › I

    INSTRUMENT FLIGHT RULES (IFR)- Rules governing the procedures for conducting instrument flight. Also a term used by pilots and controllers to indicate type of flight plan. (See INSTRUMENT METEOROLOGICAL CONDITIONS.) (See VISUAL FLIGHT RULES.) (See VISUAL METEOROLOGICAL CONDITIONS.) (See ICAO ... term INSTRUMENT FLIGHT RULES.) (Refer to AIM.) INSTRUMENT FLIGHT RULES [ICAO]- A set of rules governing the conduct of flight under instrument meteorological conditions. INSTRUMENT LANDING SYSTEM (ILS)- A precision instrument approach system which normally consists of the following electronic…

  • Chapter 10: IFR Flight › Approaches › Instrument Approaches to Civil Airports

    Instrument Approaches to Civil Airports Unless otherwise authorized, when an instrument letdown to an airport is necessary, the pilot should use a standard IAP prescribed for that airport. IAPs are depicted on IAP charts and are found ... approach procedures depend upon the facilities available at the terminal area, the type of instrument approach executed, and the existing weather conditions. The ATC facilities, NAVAIDs, and associated frequencies appropriate to each standard instrument approach are given on the approach…

  • Chapter 13: Transition to Multiengine Airplanes › Multiengine Training Considerations

    case, the pilot will be able to take appropriate action leading to a safe outcome. Much of this chapter discussed loss of directional control. How to obtain the best performance with an inoperative engine was also described in detail. These ... correspond to the red radial line (VMC) and the blue radial line (VYSE) on the airspeed indicator. The actions a pilot takes when dealing with stalls, VMC, or best performance vary greatly. Understanding these concepts, knowing how to mitigate…