AP.VII.E.S2
SkillFollow the manufacturer’s recommended emergency procedures and complete the appropriate checklist.
From the FAA library
- Chapter 9: Flight Manuals and Other Documents › Placards › Emergency Procedures (Section 3)
describing the recommended procedures and airspeeds for coping with various types of emergencies or critical situations are located in the Emergency Procedures section. Some of the emergencies covered include: engine failure, fire, and system failure. The procedures for inflight engine ... Manufacturers may first show an emergency checklist in an abbreviated form with the order of items reflecting the sequence of action. Amplified checklists that provide additional information on the procedures follow the abbreviated checklist. To be prepared for emergency situations…
- Chapter 6: Threat and Error Management › Defenses Provided to the Pilot or Crew › Checklists, Standard Operating Procedures, and Best Practices
different strategies and defenses to manage risk while in the air. Defenses Provided to the Pilot or Crew A manufacturer, employer, or a flight school may provide defenses to pilots. Examples include checklists, operating limitations, minimum pilot qualifications, standard operating ... procedures, and insurance requirements. Regardless of the flight mission, some defenses will always be predetermined. Checklists, Standard Operating Procedures, and Best Practices Like the aircraft, its approved checklists are normally provided. The manufacturer’s approved checklists, placards, and emergency procedures…
- Chapter 14: Airport Operations › Collision Avoidance › Clearing Procedures
Clearing Procedures The following procedures and considerations are in place to assist pilots in collision avoidance under various situations: • Before takeoff—prior to taxiing onto a runway or landing area in preparation for takeoff, pilots should scan the approach area ... possible landing traffic, executing appropriate maneuvers to provide a clear view of the approach areas. • Climbs and descents—during climbs and descents in flight conditions that permit visual detection of other traffic, pilots should execute gentle banks left and right…
- Glossary › Domestic Reduced Vertical Separation Minimum
flown, the controller observes the radar track and issues control instructions “turn right/left” or “stop turn,” as appropriate. Nondirectional radio beacon (NDB). A ground-based radio transmitter that transmits radio energy in all directions. Nonprecision approach. A standard instrument approach ... procedure in which only horizontal guidance is provided. No procedure turn (NoPT). Term used with the appropriate course and altitude to denote that the procedure turn is not required. NoPT. See no procedure turn. NOTAM. See Notice to Airmen. Notice…
- Chapter 14: Airport Operations › Radio Communications › Lost Communication Procedures
Using Proper Radio Procedures Using proper radio phraseology and procedures contribute to a pilot’s ability to operate safely and efficiently in the airspace system. A review of the Pilot/Controller Glossary contained in the AIM assists a pilot ... communications. When communicating with ATC, pilots should use this alphabet to identify their aircraft. [Figure 14-41] Lost Communication Procedures It is possible that a pilot might experience a malfunction of the radio. This might cause the transmitter, receiver…
- Chapter 3: Identifying Hazards & Associated Risks › Using the PAVE Checklist to Identify Hazards › Pilot Hazards
Using the PAVE Checklist to Identify Hazards As described in Chapter 1, the PAVE checklist provides a means to identify hazards using four convenient hazard “buckets.” Using all four checklist categories before a flight captures most hazards normally encountered. This ... with each category. Pilot Hazards “P” hazards can be classified in terms of both capability and aeromedical factors as follows: 1. Qualification–Does the pilot possess the appropriate pilot certificate, category, class, and type rating needed to operate a specific…