HI.IV.A.K1
KnowledgePurpose of the maneuver.
From the FAA library
- Chapter 9: Basic Flight Maneuvers › Ground Reference Maneuvers
controlling the helicopter and watching for other aircraft in the vicinity. Other examples of ground reference maneuvers are flights for photographic or observation purposes, such as pipe line or power line checks. Prior to each maneuver, a clearing turn should…
- Glossary › Domestic Reduced Vertical Separation Minimum
opening near the leading edge of a wing that ducts air onto the top surface of the wing. Its purpose is to increase lift at higher angles of attack. FL. See flight level. Flameout. A condition in the operation ... Basic maneuvers, flown by reference to the instruments rather than outside visual cues, for the purpose of practicing basic attitude flying. The patterns simulate maneuvers encountered on instrument flights such as holding patterns, procedure turns, and approaches…
- Chapter 6: Flight Controls › Flight Control Systems › Primary Flight Controls
control column and/or rudder pedals may be limited. The purpose of these design limits is to prevent the pilot from inadvertently overcontrolling and overstressing the aircraft during normal maneuvers…
- Chapter 9: Techniques of Flight Instruction › Assessment of Piloting Ability › Postflight Evaluation
flight instructor to keep the learner informed of progress. This may be done as each procedure or maneuver is completed or summarized during postflight critiques. Postflight critiques should be in a written format, such as notes to aid the flight ... during the SBT. Collaborative assessment includes learner self-assessment and a detailed assessment by the aviation instructor. The purpose of the self-assessment is to stimulate growth in the learner’s thought processes and, in turn, behaviors. The self-assessment…
- Chapter 10: Advanced Flight Maneuvers
edge of the safe operating envelope. Therefore, if you are ever in doubt about the outcome of the maneuver, abort the mission entirely or wait for more favorable conditions. Reconnaissance Procedures When planning to land or takeoff at an unfamiliar ... much information as possible about the area. Reconnaissance techniques are ways of gathering this information. High Reconnaissance The purpose of conducting a high reconnaissance is to determine direction and speed of the wind, a touchdown point, suitability of the landing…
- Chapter 3: Basic Flight Maneuvers › Glides
The purpose of pitch control during the glide is to maintain the…