HI.XI.A.S7
SkillMaintain a heading, ±5°, throughout the maneuver.
From the FAA library
- Chapter 9: Basic Flight Maneuvers › Hovering—Rearward Flight › Technique
used. During the maneuver, maintain a constant groundspeed, altitude, and heading. Due to the limited visibility behind a helicopter, it is important that the area behind the helicopter be cleared before beginning the maneuver. Use of ground personnel is recommended ... line. Begin the maneuver from a normal hovering height by applying rearward pressure on the cyclic. After the movement has begun, position the cyclic to maintain a slow groundspeed—no faster than a brisk walk. Throughout the maneuver, maintain constant…
- Chapter 9: Basic Flight Maneuvers › Hovering—Sideward Flight › Technique
5. Failure to maintain alignment with direction of travel. Hovering—Sideward Flight Sideward hovering flight may be necessary to move the helicopter to a specific area when conditions make it impossible to use forward flight. During the maneuver, a constant ... altitude, and heading should be maintained. Technique Before starting sideward hovering flight, ensure the area for the hover is clear, especially at the tail rotor. Constantly monitor hover height and tail rotor clearance during all hovering maneuvers to prevent dynamic…
- Chapter 9: Basic Flight Maneuvers › Hovering—Forward Flight › Technique
maneuver, constant groundspeed, altitude, and heading should be maintained. Technique Before starting, pick out two references directly in front and in line with the helicopter. These reference points should be kept in line throughout the maneuver. [Figure 9-7] Begin…
- Chapter 9: Basic Flight Maneuvers › Normal Takeoff from a Hover › Technique
The increase in power requires an increase in the proper antitorque pedal…
- Chapter 9: Basic Flight Maneuvers › Taxiing › Technique
Throughout the maneuver, maintain a desired groundspeed and ground track with the cyclic, a constant heading with antitorque pedals, the desired altitude with the collective, and proper operating rpm with the throttle. During a crosswind taxi, hold the cyclic into ... Failure to use proper antitorque pedal control, resulting in excessive heading change. 3. Failure to maintain desired altitude. 4. Failure to maintain proper rpm. Figure 9-11. Surface taxi. 5. Overflying parked aircraft causing possible damage from rotor downwash. Improper…