HI.XII.B.K3
KnowledgeSuitable takeoff point and departure flight path during climb.
From the FAA library
- Chapter 12: Night Operations › Night Flight › Takeoff
unaided (no night vision equipment) approaches and departures. 5. Avoid downwind and crosswind approaches at night when able. Takeoff Before takeoff, make sure that there is a clear, unobstructed takeoff path. At airports, this is accomplished by taking off over ... suitable takeoff path is chosen, select a point down the takeoff path to use for directional reference. The landing light should be positioned in order to illuminate the tallest obstacles in the takeoff path. During a night takeoff, notice…
- Chapter 9: Techniques of Flight Instruction › Postflight Evaluation › First Solo Flight
First Solo Flight During the learner’s first solo flight, the instructor needs to be present to assist in answering questions or resolving any issues that arise during the flight. To ensure the solo flight is a positive, confidence-building ... experience for the learner, the flight instructor needs to consider time of day when scheduling the flight. Time of day is a factor in traffic congestion, possible winds, sun angles, and reflection. If possible, the flight instructor needs access…
- Chapter 9: Techniques of Flight Instruction › Sterile Flight Deck Rule
Sterile Flight Deck Rule Commonly known as the “sterile flight deck rule,” Title 14 of the Code of Federal Regulations (14 CFR) part 121, section 121.542 requires airline flight crewmembers to refrain from nonessential activities during critical phases of flight ... defined in the regulation, critical phases of flight are all ground operations involving taxi, takeoff, and landing, and all other flight operations below 10,000 feet except cruise flight. Nonessential activities include such activities as eating, reading a newspaper…
- Chapter 5: Aerodynamics of Flight › Aerodynamic Forces in Flight Maneuvers › Forces in Descents
Figure 5-36. Changes in lift during climb entry. The thrust required for a stabilized climb equals drag plus a percentage of weight dependent on the angle of climb. For example, a 10° climb would require thrust to equal drag ... plus 17 percent of weight. To climb straight up would require thrust to equal all of weight and drag. Therefore, the angle of climb for climb performance is dependent on the amount of excess thrust available to overcome a portion…
- Chapter 1: Introduction To Flying › Who Administers the FAA Practical Tests? › Role of the Certificated Flight Instructor
decision-making, and good operating practices. A pilot training program depends on the quality of the ground and flight instruction the student pilot receives. The flight instructor must possess a thorough understanding of the learning process, knowledge of the fundamentals ... student pilot. Use of a structured training program and formal course syllabus is crucial for effective and comprehensive flight training. It should be clear to the student in advance of every lesson what the course of training will involve…
- Chapter 2: Aerodynamics of Flight › Sideward Flight
Sideward Flight In sideward flight, the tip-path plane is tilted in the direction that flight is desired. This tilts the total lift-thrust vector sideward. In this case, the vertical or lift component is still straight up and weight ... horizontal or thrust component now acts sideward with drag acting to the opposite side. [Figure 2-42] Sideward flight can be a very unstable condition due to the parasitic drag of the fuselage combined with the lack of horizontal stabilizer…