IL.II.C.K4
KnowledgeAirport markings, signs, and lights including the importance of hold lines associated with runways.
From the FAA library
- Chapter 2. Aeronautical Lighting and Other Airport Visual Aids › Section 3. Airport Marking Aids and Signs › 2-3-3. Runway Markings
three parallel runways “L” “C” “R.” c. Runway Centerline Marking. The runway centerline identifies the center of the runway and provides alignment guidance during takeoff and landings. The centerline consists of a line of uniformly spaced stripes and gaps ... Runway Aiming Point Marking. The aiming point marking serves as a visual aiming point for a landing aircraft. These two rectangular markings consist of a broad white stripe located on each side of the runway centerline and approximately…
- Chapter 14: Airport Operations › Airport Markings and Signs › Runway Holding Position Sign
Figure 14-6. (A) Displaced runway threshold drawing. (B) Displaced threshold for Runway 17 at Albuquerque International Airport (ABQ). If a taxiway intersects a runway somewhere other than at the threshold, the sign has the designation of the intersecting runway ... runway numbers on the sign are arranged to correspond to the relative location of the respective runway thresholds. Figure 14-10 shows “18-36” to indicate the threshold for Runway 18 is to the left and the threshold for Figure…
- Chapter 2. Aeronautical Lighting and Other Airport Visual Aids › Section 3. Airport Marking Aids and Signs › 2-3-5. Holding Position Markings
Holding Position Markings a. Runway Holding Position Markings. For runways, these markings indicate where aircraft MUST STOP when approaching a runway. They consist of four yellow lines, two solid and two dashed, spaced six or twelve inches apart, and extending ... across the width of the taxiway or runway. The solid lines are always on the side where the aircraft must hold. There are three locations where runway holding position markings are encountered. 1. Runway Holding Position Markings on Taxiways. These…
- Chapter 2. Aeronautical Lighting and Other Airport Visual Aids › Section 3. Airport Marking Aids and Signs › 2-3-8. Mandatory Instruction Signs
Airport Signs There are six types of signs installed on airfields: mandatory instruction signs, location signs, direction signs, destination signs, information signs, and runway distance remaining signs. The characteristics and use of these signs are discussed in paragraph ... Mandatory Instruction Signs, through paragraph 2-3-13, Runway Distance Remaining Signs. Runway Holding Position Sign FIG 2-3-25 Holding Position Sign at Beginning of Takeoff Runway 2-3-8. Mandatory Instruction Signs a. These signs have…
- Pilot/Controller Glossary › R
series of evenly spaced lights to the runway edge aligned with the taxiway centerline, and one additional light at the runway centerline in line with the last two lights before the runway edge. RUNWAY GRADIENT- The average slope, measured ... percent, between two ends or points on a runway. Runway gradient is depicted on Government aerodrome sketches when total runway gradient exceeds 0.3%. RUNWAY HEADING- The magnetic direction that corresponds with the runway centerline extended, not the painted runway number…