IL.VIII.C.S9
SkillAfter clearing the obstacle, establish pitch attitude and aircraft configuration for VY and accelerate to and maintain VY ±5 knots during the climb.
From the FAA library
- Chapter 11: Aircraft Performance › Performance › Climb Performance
Positive climb performance occurs when an aircraft gains PE by increasing altitude. Two basic factors, or a combination of the two factors, contribute to positive climb performance in most aircraft: 1. The aircraft climbs (gains PE) using excess power above ... that required to maintain level flight, or 2. The aircraft climbs by converting airspeed (KE) to altitude (PE). As an example of factor 1 above, an aircraft with an engine capable of producing 200 horsepower (at a given altitude…
- Chapter 11: Aircraft Performance › Performance › Climb Performance Factors
Climb Performance Factors Since weight, altitude and configuration changes affect excess thrust and power, they also affect climb performance. Climb performance is directly dependent upon the ability to produce either excess thrust or excess power. Earlier in the book ... altitude, lowering the landing gear, or lowering the flaps all decrease both excess thrust and excess power for all aircraft. Therefore, maximum AOC and maximum ROC performance decreases under any of these conditions. Weight has a very pronounced effect…
- Chapter 5: Aerodynamics of Flight › Aerodynamic Forces in Flight Maneuvers › Forces in Descents
Figure 5-36. Changes in lift during climb entry. The thrust required for a stabilized climb equals drag plus a percentage of weight dependent on the angle of climb. For example, a 10° climb would require thrust to equal drag ... plus 17 percent of weight. To climb straight up would require thrust to equal all of weight and drag. Therefore, the angle of climb for climb performance is dependent on the amount of excess thrust available to overcome a portion…
- Chapter 11: Aircraft Performance › Performance › Rate of Climb (ROC)
Rate of Climb (ROC) ROC is a comparison of altitude gained relative to the time needed to reach that altitude. ROC is simply the vertical component of the aircraft’s flight path velocity vector. For maximum ROC performance, a pilot ... flies the aircraft at VY so as to achieve a maximum gain in altitude over a given period of time. Maximum ROC expedites a climb to an assigned altitude. This gains the greatest vertical distance over a period of time…
- Chapter 17: Aeromedical Factors › Health and Physiological Factors Affecting Pilot Performance › Climbing While Turning
teach pilots to understand the susceptibility of the human system to spatial disorientation. 2. They demonstrate that judgments of aircraft attitude based on bodily sensations are frequently false. 3. They help decrease the occurrence and degree of disorientation through ... better understanding of the relationship between aircraft motion, head movements, and resulting disorientation. 4. They help instill a greater confidence in relying on flight instruments for assessing true aircraft attitude. A pilot should not attempt any of these maneuvers…
- Chapter 11: Aircraft Performance › Performance › Straight-and-Level Flight
Level Flight All of the principal components of flight performance involve steady-state flight conditions and equilibrium of the aircraft. For the aircraft to remain in steady, level flight, equilibrium must be obtained by a lift equal to the aircraft ... weight and a powerplant thrust equal to the aircraft drag. Thus, the aircraft drag defines the thrust required to maintain steady, level flight. As presented in Chapter 4, Aerodynamics of Flight, all parts of an aircraft contribute to the drag…