Tutor Platform
Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 10: Weight and Balance

    understanding the operations, limitations, and performance characteristics of the aircraft, the pilot can make educated flight decisions. By learning what preventive maintenance is allowed on the aircraft, a pilot can maintain his or her aircraft in an airworthy condition ... aircraft is critical to flight safety. Operating above the maximum weight limitation compromises the structural integrity of an aircraft and adversely affects its performance. Operation with the center of gravity (CG) outside the approved limits results in control difficulty…

  • Chapter 5: Aerodynamics of Flight › Weight and Balance › Effect of Weight on Flight Performance

    make it impossible for the aircraft to clear an obstacle that normally would not be a problem during takeoff under more favorable conditions. The detrimental effects of overloading on performance are not limited to the immediate hazards involved with takeoffs ... read charts for determining weight and balance data are now provided. Increased performance and loadcarrying capability of these aircraft require strict adherence to the operating limitations prescribed by the manufacturer. Deviations from the recommendations can result in structural damage…

  • Chapter 11: Aircraft Performance › Performance Charts › Sample Problem 11

    more than one exists at a particular airport, but also so that the aircraft is not pushed beyond its tested limits. Figure 11-30. Cruise performance graph. Landing Charts Landing performance is affected by variables similar to those affecting takeoff…

  • Chapter 9: Techniques of Flight Instruction › Positive Exchange of Flight Controls › Procedure

    demonstration and, finally, the learner performs the maneuver with the instructor following along on the controls. [Figure 9-8] Flight instructors should always guard the controls and be prepared to take control of the aircraft. When necessary, the instructor should ... learner on the controls and having to fight for control of the aircraft. Learners should never be allowed to exceed the flight instructor’s limits. Flight instructors should not exceed their own ability to perceive a problem, decide upon…

  • Chapter 5: Aerodynamics of Flight › Aircraft Design Characteristics

    structural strength. These limitations indicate the maximum performance and maneuverability of the aircraft. If the aircraft is to provide maximum utility, it must be safely controllable to the full extent of these limits without exceeding the pilot’s strength…

  • Chapter 4. Air Traffic Control › Section 3. Airport Operations › 4-3-25. Flight Inspection/‘Flight Check’ Aircraft in Terminal Areas

    line up and wait,” all lights, except for landing lights, should be illuminated to make the aircraft conspicuous to ATC and other aircraft on approach. Landing lights should be turned on when takeoff clearance is received or when commencing takeoff ... Flight Check’ Aircraft in Terminal Areas a. Flight check is a call sign used to alert pilots and air traffic controllers when a FAA aircraft is engaged in flight inspection/certification of NAVAIDs and flight procedures. Flight check aircraft fly preplanned…