Tutor Platform
Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 4. Air Traffic Control › Section 3. Airport Operations › 4-3-11. Pilot Responsibilities When Conducting Land and Hold Short Operations (LAHSO)

    clearance, unless an amended clearance is obtained or an emergency occurs. A LAHSO clearance does not preclude a rejected landing. 6. A pilot who accepts a LAHSO clearance should land and exit the runway at the first convenient taxiway (unless ... reaching the hold short point. Otherwise, the pilot must stop and hold at the hold short point. If a rejected landing becomes necessary after accepting a LAHSO clearance, the pilot should maintain safe separation from other aircraft or vehicles…

  • Chapter 1: Risk Management and Single-Pilot Resource Management › Teaching Decision-Making Skills

    that come into play when performing a short field landing, which include runway conditions, noflap landings, airport obstructions, and rejected landings. The introduction of such items need not increase training times. In fact, all of the hazards or considerations referenced…

  • Chapter 5. Air Traffic Procedures › Section 4. Arrival Procedures › 5-4-21. Missed Approach

    instrument approach procedure, the pilot should assess the actions to be taken in the event of a balked (rejected) landing beyond the missed approach point or below the MDA or DA (H) considering the anticipated weather conditions and available aircraft…

  • Chapter 14: Airport Operations › Engineered Materials Arresting Systems (EMAS) › Pilot Considerations

    adhered to: 1. Continue deceleration - Regardless of aircraft speed upon exiting the runway, continue to follow Rejected/ Aborted Takeoff procedures, or if landing, Maximum Braking procedures outlined in the Flight Manual. Figure 14-57. There have been several incidents where…

  • Chapter 9: Approaches and Landings › Go-Arounds (Rejected Landings)

    Arounds (Rejected Landings) A go-around is a normal maneuver that is used when approach and landing parameters deviate from expectations or when it is hazardous to continue. Situations such as air traffic control (ATC) requirements, unexpected appearance of hazards…

  • Chapter 9: Approaches and Landings › Go-Arounds (Rejected Landings) › Configuration

    Configuration After establishing the proper climb attitude and power settings, the pilot…