IL.VIII.H.R1
Risk managementRecognition of the need for a go-around/rejected landing.
From the FAA library
- Chapter 11: Aircraft Performance › Takeoff and Landing Performance › Landing Performance
item that alters the landing speed or deceleration rate during the landing roll affects the landing distance. The effect of gross weight on landing distance is one of the principal items determining the landing distance. One effect of an increased ... gross weight is that a greater speed is required to support the aircraft at the landing AOA and lift coefficient. For an example of the effect of a change in gross weight, a 21 percent increase in landing weight requires…
- Pilot/Controller Glossary › L
LANDING DIRECTION INDICATOR- A device which visually indicates the direction in which landings and takeoffs should be made. (See TETRAHEDRON.) (Refer to AIM.) LANDING DISTANCE AVAILABLE (LDA)- The runway length declared available and suitable for a landing airplane. (See ICAO ... term LANDING DISTANCE AVAILABLE.) LANDING DISTANCE AVAILABLE [ICAO]- The length of runway which is declared available and suitable for the ground run of an aeroplane landing. LANDING MINIMUMS- The minimum visibility prescribed for landing a civil aircraft while using…
- Chapter 10: Teaching Practical Risk Management during Flight Instruction › Notes on Instructional Risk Management in the Flight Deck › Managing Risk while Teaching Landings
control or aircraft in the pattern. To avoid this, the instructor should only use concise prompting on approach to landings with the learner. Certain landings present unique risks. The instructor teaches the appropriate pre-landing reconnaissance for unfamiliar landing areas ... uncontrolled fields. During landings in strong winds, the instructor should have the skill sufficient to deal with the wind conditions. During a short-field or confined area landing, certain aircraft may fly at a slower approach speed. The instructor should…
- Chapter 9: Approaches and Landings › Go-Arounds (Rejected Landings)
Arounds (Rejected Landings) A go-around is a normal maneuver that is used when approach and landing parameters deviate from expectations or when it is hazardous to continue. Situations such as air traffic control (ATC) requirements, unexpected appearance of hazards ... overtaking another airplane, wind shear, wake turbulence, mechanical failure, or an unstable approach are all reasons to discontinue a landing approach. Like any other normal maneuver, the go-around should be practiced and perfected. The flight instructor should emphasize early…
- LANDINGS
LANDINGS Landing a skiplane is easy compared to landing with wheels; however, for off-airport landings, extra precautions are necessary. Be careful in choosing a landing site. Before landing, evaluate the site to be sure a safe departure will ... possible. Upon arriving at a prospective landing site, a pass should be made over the landing area to determine landing direction, and to determine if a safe approach and landing can be completed. A trial landing should be accomplished…