IL.X.B.R6
Risk managementAltitude variation/vertical speed.
From the FAA library
- Chapter 5: Aerodynamics of Flight › High Speed Flight › Subsonic Versus Supersonic Flow
Compressibility (and to a lesser extent viscosity) is of paramount importance at speeds approaching the speed of sound. In these speed ranges, compressibility causes a change in the density of the air around an aircraft. During flight, a wing produces ... lift by accelerating the airflow over the upper surface. This accelerated air can, and does, reach sonic speeds even though the aircraft itself may be flying subsonic. At some extreme AOAs, in some aircraft, the speed of the air over…
- Chapter 4: Principles of Flight › Pressure › Density Altitude
Density Altitude SDP is a theoretical pressure altitude, but aircraft operate in a nonstandard atmosphere and the term density altitude is used for correlating aerodynamic performance in the nonstandard atmosphere. Density altitude is the vertical distance above sea level ... propeller is less efficient in thin air • Lift because the thin air exerts less force on the airfoils Density altitude is pressure altitude corrected for nonstandard temperature. As the density of the air increases (lower density altitude), aircraft performance increases…
- Chapter 11: Aircraft Performance › Density Altitude
Density Altitude The more appropriate term for correlating aerodynamic performance in the nonstandard atmosphere is density altitude—the altitude in the standard atmosphere corresponding to a particular value of air density. Density altitude is pressure altitude corrected for nonstandard temperature ... density of the air increases (lower density altitude), aircraft performance increases. Conversely, as air density decreases (higher density altitude), aircraft performance decreases. A decrease in air density means a high density altitude; an increase in air density means a lower…
- Chapter 8: Flight Instruments › Types of Altitude
Indicated altitude—read directly from the altimeter (uncorrected) when it is set to the current altimeter setting. 2. True altitude—the vertical distance of the aircraft above sea level—the actual altitude. It is often expressed as feet above mean ... level (MSL). Airport, terrain, and obstacle elevations on aeronautical charts are true altitudes. 3. Absolute altitude—the vertical distance of an aircraft above the terrain, or above ground level (AGL). 4. Pressure altitude—the altitude indicated when the altimeter setting…
- Chapter 8: Flight Instruments › Altimeter Operation
altimeter indicates an altitude above the actual field elevation. If the barometric pressure setting is reset to the current altimeter setting of 29.68 "Hg, then the field elevation is again indicated on the altimeter. This pressure change ... easily noticed in flight since aircraft fly at specific altitudes. The aircraft steadily decreases true altitude while the altimeter is held constant through pilot action as discussed in the previous section. Knowing the aircraft’s altitude is vitally important…
- Chapter 5: Aerodynamics of Flight › High Speed Flight › Mach Number Versus Airspeed
level at 152 KTAS. However, it is flying at higher Mach number. Another factor to consider is the speed of sound. A decrease in temperature in a gas results in a decrease in the speed of sound. Thus ... aircraft climbs in altitude with outside temperature dropping, the speed of sound is dropping. At sea level, the speed of sound is approximately 661 KCAS, while at FL 380 it is 574 KCAS. Thus, for our jet transport aircraft…