Tutor Platform

PA.IV.M.S4

Skill

Select the most suitable touchdown point based on wind, landing surface, obstructions, and airplane limitations.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 11: Aircraft Performance › Takeoff and Landing Performance › Landing Performance

    item that alters the landing speed or deceleration rate during the landing roll affects the landing distance. The effect of gross weight on landing distance is one of the principal items determining the landing distance. One effect of an increased ... gross weight is that a greater speed is required to support the aircraft at the landing AOA and lift coefficient. For an example of the effect of a change in gross weight, a 21 percent increase in landing weight requires…

  • Chapter 18: Emergency Procedures › Flight Control Malfunction/Failure › Landing Gear Malfunction

    hard surface does, however, create sparks that can ignite fuel. If the airport is so equipped, the pilot can request that the runway surface be foamed. The pilot should consider burning off excess fuel. This reduces landing speed and fire ... potential. If the landing gear malfunction is limited to one main landing gear leg, the pilot should consume as much fuel from that side of the airplane as practicable, thereby reducing the weight of the wing on that side…

  • Chapter 9: Approaches and Landings › Crosswind Approach and Landing › Crosswind After-Landing Roll

    With the main wheels acting as a pivot point and the greater surface area exposed to the crosswind behind that pivot point, the airplane tends to turn or weathervane into the wind. The relative wind acting on an airplane during ... after-landing roll is the result of two factors. One is the natural wind, which acts in the direction the air mass is traveling. It has a headwind component acting along the airplane’s ground track and a crosswind component…

  • Chapter 9: Approaches and Landings › Normal Approach and Landing › Base Leg

    Base Leg The placement of the base leg is one of the important judgments made by the pilot to set up for a good landing. [Figure 9-3] The pilot accurately judges the height, distance from the approach ... runway, and rate of descent to allow a stabilized approach, round out, and touchdown at the desired spot. The distance depends on the altitude of the base leg, the current winds, and the amount of wing flaps used. When there…

  • Chapter 9: Approaches and Landings › Emergency Approaches and Landings (Simulated)

    Emergency Approaches and Landings (Simulated) During dual training flights, the instructor should give simulated emergency landings by retarding the throttle and calling “simulated emergency landing.” The objective of these simulated emergency landings is to develop a pilot’s accuracy, judgment ... planning, procedures, and confidence when little or no power is available. A simulated emergency landing may be given with the airplane in any configuration. If the simulated power failure occurs while above best glide speed, the pilot allows the airplane…

  • Chapter 2: Ground Operations › Preflight Assessment of the Aircraft › Landing Gear, Tires, and Brakes

    Landing Gear, Tires, and Brakes The landing gear, tires, and brakes allow the airplane to maneuver from and return to the ramp, taxiway, and runway environment in a precise and controlled manner. The landing gear, tires, and brakes should ... inspected to ensure that the airplane can be positively controlled on the ground. Landing gear on airplanes varies from simple fixed gear to complex retractable gear systems. Fixed landing gear is a gear system in which the landing gear struts…