Tutor Platform
Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 7: Ground Reference Maneuvers › Elementary Eights

    following purposes: ⦁ Further development of the pilot’s skill in maintaining a specific relationship between the airplane and the ground references. ⦁ Improving the pilot’s ability to divide attention between the flightpath and ground-based references, manipulation of the flight ... during both turning and straight-line flight. ⦁ Developing the pilot’s skills to visualize each specific segment of the maneuver and the maneuver as a whole, prior to execution. ⦁ Developing a pilot’s ability to intuitively manipulate flight controls…

  • 14 CFR § 61.412 Do I need additional training to provide instruction on control and maneuvering an airplane solely by reference to the instruments in an aircraft based on VH?

    provide flight training under § 61.93(e)(12) on control and maneuvering an airplane solely by reference to the flight instruments for the purpose of issuing a solo cross-country endorsement under § 61.93(c)(1) to a student pilot seeking ... subpart H of this part who certifies that the person is proficient in providing training on control and maneuvering solely by reference to the flight instruments in an airplane with a VH greater than 87 knots CAS. This flight training…

  • Chapter 6: Takeoffs and Departure Climbs › Introduction › Terms and Definitions

    continuous maneuver, it will be divided into three separate steps for purposes of explanation: 1.) takeoff roll; 2.) lift-off; and 3.) initial climb after becoming airborne. Refer to Figure 6-1 and the detail below. ⦁ Takeoff roll (ground roll ... climb pitch attitude has been established. Normally, it is considered complete when the airplane has reached a safe maneuvering altitude or an en route climb has been established…

  • Glossary › Domestic Reduced Vertical Separation Minimum

    Basic maneuvers, flown by reference to the instruments rather than outside visual cues, for the purpose of practicing basic attitude flying. The patterns simulate maneuvers encountered on instrument flights such as holding patterns, procedure turns, and approaches. Flight strips. Paper ... sucked into the engine while it is running. Debris from runways or taxiways can cause foreign object damage during ground operations, and the ingestion of ice and birds can cause FOD in flight. Form drag. The drag created because…

  • Chapter 9: Basic Flight Maneuvers › Ground Reference Maneuvers

    while controlling the helicopter and watching for other aircraft in the vicinity. Other examples of ground reference maneuvers are flights for photographic or observation purposes, such as pipe line or power line checks. Prior to each maneuver, a clearing turn ... drift at altitude, crab the helicopter into the wind. Rectangular Course The rectangular course is a training maneuver in which the ground track of the helicopter is kept equidistant from the sides of a selected rectangular area. While performing…