PA.V.B.S4
SkillApply adequate wind-drift correction during straight and turning flight to maintain a constant ground track around a rectangular reference area, or to maintain a constant radius turn on each side of a selected reference line or point.
From the FAA library
- Chapter 7: Ground Reference Maneuvers › Turns Around a Point
Figure 7-5. Turns around a point. When performing a turn around a point, the pilot should select a prominent, ground-based reference that is easily distinguishable yet small enough to present a precise reference ... fastest, at the appropriate radius of turn and distance from the selected ground-based reference point. In a high-wing airplane, the lowered wing may block the view of the ground reference point, especially in airplanes with…
- Chapter 10: Performance Maneuvers › Lazy Eight
performance of the lazy eight’s symmetrical climbing/descending turns, the pilot selects prominent reference points on the natural horizon. The reference points selected should be at 45°, 90°, and 135° from the direction in which the maneuver ... from level flight a gradual climbing turn is begun in the direction of the 45° reference point. The climbing turn should be planned and controlled so that the maximum pitch-up attitude is reached…
- Chapter 9: Approaches and Landings › Final Approach › Stabilized Approach Concept
which the pilot establishes and maintains a constant-angle glide path towards a predetermined point on the landing runway. It is based on the pilot’s judgment of certain visual clues and depends on maintaining a constant ... rate and airspeed travels in a straight line towards a spot on the ground ahead, commonly called the aiming point. If the airplane maintains a constant glide path without a round out for landing, it will strike…
- Chapter 3: Basic Flight Maneuvers › Straight-and-Level Flight › Straight Flight
overall situational awareness. Straight flight allows flying along a line. For outside references, the pilot selects a point on the horizon aligned with another point ahead. If those two points stay in alignment, the airplane will track ... line formed by the two points. A pilot can also hold a course in VFR by tracking to a point in front of a compass or magnetic direction indicator, with only glances at the instrument or indicator to ensure being…
- Chapter 12: Fundamentals of Electricity & Electronics › Series DC Circuits › Voltage Dividers
volts across R1 60 volts across R2 50 volts across R3 The voltage divider circuit discussed up to this point has had one side of the power supply (battery) at ground potential. In Figure 12-91, the common reference point (ground symbol) has been moved to a different point on the voltage divider. The voltage drop across R1 is 20 volts; however, since tap A is connected to a point in the circuit that is at the same…