Tutor Platform
Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 13: Transition to Multiengine Airplanes › Engine Inoperative Flight Principles › Derivation of VMC

    Engine Inoperative Flight Principles There are two main considerations for OEI operations—performance and control. Multiengine pilots learn to operate the airplane for maximum rate of climb performance at the blue radial indicated airspeed by training to fly without sideslip ... Pilots also learn to recognize and recover from loss of directional control associated with the red radial indicated airspeed by performing a VMC demonstration. Since the object of a VMC demonstration is not performance, sideslip occurs during the maneuver. Detailed…

  • Chapter 13: Transition to Multiengine Airplanes › Engine Inoperative Flight Principles › VMC Demo Stall Avoidance

    reducing the angle of attack as the throttle is retarded and return the airplane to the entry airspeed. Note that noise within the flight deck may mask the sound of the stall warning horn. While the VMC demonstration shows ... earliest onset of a loss of directional control when performed in accordance with the foregoing procedures, avoid a stalled condition. Avoid stalls with asymmetrical thrust, such that the VMC demonstration does not degrade into a single-engine stall. A VMC…

  • Chapter 13: Transition to Multiengine Airplanes › Engine Inoperative Flight Principles › ⦁ All propeller controls in the recommended takeoff position throughout VMC determination

    determination of VMC in certification is solely concerned with the minimum speed for directional control under a very specific set of circumstances, and not the optimum airplane attitude or configuration for climb performance. During dynamic VMC determination in aircraft certification ... cuts of the critical engine using the mixture control are performed by flight test pilots while gradually reducing the speed with each attempt. VMC is the minimum speed at which directional control could be maintained within 20° of the original…

  • Chapter 3: Basic Flight Maneuvers › Effect and Use of Flight Controls

    With the pilot’s hand: ⦁ When pulling the elevator pitch control toward the pilot, which is an aft movement of the control wheel, yoke, control stick, or side stick controller (referred to as adding back pressure), the airplane’s nose ... airplane. Think of this movement from the pilot’s feet to the pilot’s head. ⦁ When pushing elevator pitch control toward the instrument panel, (referred to as increasing forward pressure), the airplane rotates the nose forward relative to the pilot…