PH.I.F.K2d
KnowledgeFactors affecting performance, including:
Airport, heliport, helipad, or unprepared surface environment
From the FAA library
- Chapter 14: Airport Operations
These may be publicly or privatelyowned. • General Aviation Airports — the remaining airports are commonly described as General Aviation Airports. This airport type is the largest single group of airports in the U.S. system. The category also includes privately owned, public ... airports that enplane 2500 or more passengers annually and receive scheduled airline service. Types of Airports There are two types of airports—towered and nontowered. These types can be further subdivided to: • Civil Airports—airports that are open…
- Chapter 11: Aircraft Performance › Takeoff and Landing Performance › Runway Surface and Gradient
Runway Surface and Gradient Runway conditions affect takeoff and landing performance. Typically, performance chart information assumes paved, level, smooth, and dry runway surfaces. Since no two runways are alike, the runway surface differs from one runway to another, as does ... runway gradient or slope. [Figure 11-15] Runway surfaces vary widely from one airport to another. The runway surface encountered may be concrete, asphalt, gravel, dirt, or grass. The runway surface for a specific airport is noted in the Chart…
- Chapter 14: Airport Operations › Airport Lighting › Airport Beacon
information on areas that cannot be seen from the control tower, applicable radio frequencies, and noise abatement procedures. The airport operator determines the need, size, and location of these signs. • Runway distance remaining signs—black background with white numbers ... numbers indicate the distance of the remaining runway in thousands of feet. Airport Lighting The majority of airports have some type of lighting for night operations. The variety and type of lighting systems depends on the volume and complexity…
- Chapter 14: Airport Operations › In-Runway Lighting › Control of Airport Lighting
Control of Airport Lighting Airport lighting is controlled by ATC at towered airports. At nontowered airports, the lights may be on a timer, or where an FSS is located at an airport, the FSS personnel may control the lighting ... also request a specified intensity, if available, from ATC or FSS personnel. At selected nontowered airports, the pilot may control the lighting by using the radio. This is done by selecting a specified frequency and clicking the radio microphone. [Figure…
- Chapter 13: Effective Aeronautical Decision-Making › Single-Pilot Resource Management
route, checkpoints, frequencies, fuel required and knows exactly what to expect. However, once within 30 miles of the destination airport the pilot observes that weather is deteriorating, and a thunderstorm is nearby. The pilot assesses the situation and determines ... best course of action is to reroute to another airport. The closest airport is an airport within Class C airspace. At this point, the pilot realizes the publications with the required alternate airport information are in the back…
- Chapter 4. Air Traffic Control › Section 3. Airport Operations › 4-3-17. VFR Helicopter Operations at Controlled Airports
c. Takeoff and Landing Procedures. 1. Helicopter operations may be conducted from…