PH.III.A.S1
SkillComply with airport/heliport/helipad signs, markings, and lighting encountered, as applicable to the helicopter provided for the practical test.
From the FAA library
- Chapter 2. Aeronautical Lighting and Other Airport Visual Aids › Section 3. Airport Marking Aids and Signs › 2-3-8. Mandatory Instruction Signs
Airport Signs There are six types of signs installed on airfields: mandatory instruction signs, location signs, direction signs, destination signs, information signs, and runway distance remaining signs. The characteristics and use of these signs are discussed in paragraph ... Mandatory Instruction Signs, through paragraph 2-3-13, Runway Distance Remaining Signs. Runway Holding Position Sign FIG 2-3-25 Holding Position Sign at Beginning of Takeoff Runway 2-3-8. Mandatory Instruction Signs a. These signs have…
- Chapter 2. Aeronautical Lighting and Other Airport Visual Aids › Section 3. Airport Marking Aids and Signs › 2-3-3. Runway Markings
paragraph 7-7-1, Aviation Safety Reporting Program. Pilots may also report these situations to the FAA regional airports division. d. The markings and signs described in this section of the AIM reflect the current FAA recommended standards ... Airport Pavement Markings a. General. For the purpose of this section, the airport pavement markings have been grouped into four areas: 1. Runway Markings. 2. Taxiway Markings. 3. Holding Position Markings. 4. Other Markings. b. Marking Colors. Markings for runways…
- Chapter 2. Aeronautical Lighting and Other Airport Visual Aids › Section 3. Airport Marking Aids and Signs › 2-3-11. Destination Signs
taxiway designations and their associated arrows on the sign are arranged clockwise starting from the first taxiway on the pilot’s left. (See FIG 2-3-35.) e. If a location sign is located with the direction signs ... placed so that the designations for all turns to the left will be to the left of the location sign; the designations for continuing straight ahead or for all turns to the right would be located to the right…
- Chapter 14: Airport Operations › Airport Markings and Signs › Runway Markings and Signs
Airport Markings and Signs There are markings and signs used at airports that provide directions and assist pilots in airport operations. It is important for you to know the meanings of the signs, markings, and lights that are used ... airports as surface navigational aids. All airport markings are painted on the surface, whereas some signs are vertical and some are painted on the surface. An overview of the most common signs and markings are described on the following pages…
- Chapter 2. Aeronautical Lighting and Other Airport Visual Aids › Section 3. Airport Marking Aids and Signs › 2-3-9. Location Signs
Location Signs a. Location signs are used to identify either a taxiway or runway on which the aircraft is located. Other location signs provide a visual cue to pilots to assist them in determining when they have exited an area ... various location signs are described below. 1. Taxiway Location Sign. This sign has a black background with a yellow inscription and yellow border, as shown in FIG 2-3-30. The inscription is the designation of the taxiway on which…
- Chapter 2. Aeronautical Lighting and Other Airport Visual Aids › Section 1. Airport Lighting Aids › 2-1-8. Pilot Control of Airport Lighting
Control of Lighting Systems a. Operation of approach light systems and runway lighting is controlled by the control tower (ATCT). At some locations the FSS may control the lights where there is no control tower in operation. b. Pilots ... request that lights be turned on or off. Runway edge lights, in-pavement lights and approach lights also have intensity controls which may be varied to meet the pilots request. Sequenced flashing lights (SFL) may be turned…