Tutor Platform
Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 11: Helicopter Emergencies and Hazards › Dynamic Rollover

    Dynamic rollover may also occur if you use an improper landing or takeoff technique or while performing slope operations. Whatever the cause, dynamic rollover is possible if not using the proper corrective technique. Once started, dynamic rollover cannot be stopped ... aircraft as it continues rolling to the right. Quickly reducing collective pitch is the most effective way to stop dynamic rollover from developing. Dynamic rollover can occur with any type of landing gear and all types of rotor disks…

  • Chapter 11: Helicopter Emergencies and Hazards › Dynamic Rollover › Critical Conditions

    Critical Conditions Certain conditions reduce the critical rollover angle, thus increasing the possibility for dynamic rollover and reducing the chance for recovery. The rate of rolling motion is also a consideration because, as the roll rate increases, there…

  • Chapter 11: Helicopter Emergencies and Hazards › Low-G Conditions and Mast Bumping

    something. Under these conditions, vertical ascent is the only acceptable method of lift-off. 12. Be aware that dynamic rollover can be experienced during flight operations on a floating platform if the platform is pitching/rolling while attempting to land…

  • Chapter 10: Advanced Flight Maneuvers › Slope Operations

    Slope Operations Prior to conducting any slope operations, be thoroughly familiar with the characteristics of dynamic rollover and mast bumping, which are discussed in Chapter 11, Helicopter Emergencies and Hazards. The approach to a slope is similar to the approach…

  • Chapter 11: Helicopter Emergencies and Hazards › Dynamic Rollover › Slope Takeoffs and Landings

    Slope Takeoffs and Landings During slope operations, excessive application of cyclic control…