PI.X.A.S1
SkillConduct a postflight inspection and document discrepancies and servicing requirements, if any.
From the FAA library
- 14 CFR § 91.1093 Initial and transition training and checking: Check pilots (aircraft), check pilots (simulator).
training and checking: Check pilots (aircraft), check pilots (simulator). (6) The approved methods, procedures, and limitations for performing the required normal, abnormal, and emergency procedures in the aircraft. (d) The transition ground training for a check pilot must include ... approved methods, procedures, and limitations for performing the required normal, abnormal, and emergency procedures applicable to the aircraft to which the check pilot is in transition. (e) The initial and transition flight training for a check pilot (aircraft) must include…
- Appendix B: Acronyms, Abbreviations, and NOTAM Contractions
federal FEIS—Final Environmental Impact Statement FEP—front end processor FFAC—from facility FI/P—flight inspection permanent FI/T—flight inspection temporary FIFO—Flight Inspection Field Office FIG—flight inspection group FINO—Flight Inspection National Field Office FIPS—federal information publication ... minute FRC—request full route clearance FREQ—frequency FRH—fly runway heading FRI—Friday FRZN—frozen FSAS—flight service automation system FSDO—Flight Standards District Office FSDPS—flight service data processing system FSEP—facility/service/equipment profile FSP—flight strip printer FSPD…
- Chapter 9: Flight Manuals and Other Documents › Aircraft Inspections › 100-Hour Inspection
Hour Inspection All aircraft under 12,500 pounds (except turbojet/ turbopropeller-powered multi-engine airplanes and turbine powered rotorcraft), used to carry passengers for hire, must receive a 100-hour inspection within the preceding 100 hours of time in service ... must be approved for return to service. Additionally, an aircraft used for flight instruction for hire, when provided by the person giving the flight instruction, must also have received a 100-hour inspection. This inspection must be performed…
- 14 CFR § 91.213 Inoperative instruments and equipment.
Inoperative instruments and equipment. either specifically or otherwise required by the airworthiness requirements under which the aircraft is type certificated and which are essential for safe operations under all operating conditions. (2) Instruments and equipment required by an airworthiness directive ... operable condition unless the airworthiness directive provides otherwise. (3) Instruments and equipment required for specific operations by this part. (c) A person authorized to use an approved Minimum Equipment List issued for a specific aircraft under subpart K of this…
- 14 CFR § 91.1069 Flight crew: Instrument proficiency check requirements.
Flight crew: Instrument proficiency check requirements. The instrument approach procedure or procedures must include at least one straight-in approach, one circling approach, and one missed approach. Each type of approach procedure demonstrated must be conducted to published minimums ... that procedure. (d) The instrument proficiency checks required by paragraphs (a) and (b) of this section consists of either an oral or written equipment test (or a combination) and a flight check under simulated or actual IFR conditions. The equipment…
- 14 CFR § 91.1715 Currency requirements and flight review.
Currency requirements and flight review. (a) The takeoff and landing currency requirements of § 61.57 of this chapter must be maintained in the Mitsubishi MU-2B series airplane. Takeoff and landings in other multiengine airplanes do not meet the takeoff ... landing currency requirements for the Mitsubishi MU-2B series plane. Takeoff and landings in either the short-body or long-body Mitsubishi MU-2B model airplane may be credited toward takeoff and landing currency for both Mitsubishi MU-2B model…