Tutor Platform

PL.II.C.S3

Skill

Position the primary flight controls, including the thrust vector, for the prevailing environmental conditions.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 6: Flight Controls › Flight Control Systems › Servo Tabs

    airflow striking the tab counterbalances some of the air pressure against the primary control surface and enables the pilot to move the control more easily and hold the control surface in position. If the linkage between the balance ... fixed surface is adjustable from the flight deck, the tab acts as a combination trim and balance tab that can be adjusted to a desired deflection. Servo Tabs Servo tabs are very similar in operation and appearance to the trim…

  • Chapter 1: Introduction To Flying › Selecting a Flight School

    insignificant for a Private Pilot Certificate because the national average indicates most pilots require 60 to 75 hours of flight training.) Many excellent flight schools find it impractical to qualify for the FAA part 141 certificates and are referred ... schools. 14 CFR part 61 outlines certificate and rating requirements for pilot certification through noncertificated schools and individual flight instructors. It also states what knowledge-based training must be covered and how much flight experience is required for each certificate…

  • Chapter 1: Introduction To Flying › Who Administers the FAA Practical Tests? › Role of the Certificated Flight Instructor

    decision-making, and good operating practices. A pilot training program depends on the quality of the ground and flight instruction the student pilot receives. The flight instructor must possess a thorough understanding of the learning process, knowledge of the fundamentals ... student pilot. Use of a structured training program and formal course syllabus is crucial for effective and comprehensive flight training. It should be clear to the student in advance of every lesson what the course of training will involve…

  • Chapter 6: Flight Controls

    addition, in some large and fast aircraft, controls are boosted by hydraulically or electrically actuated systems. In both the fly-by-wire and boosted controls, the feel of the control reaction is fed back to the pilot by simulated means ... Current research at the National Aeronautics and Space Administration (NASA) Dryden Flight Research Center involves Intelligent Flight Control Systems (IFCS). The goal of this project is to develop an adaptive neural network-based flight control system. Applied directly to flight…

  • Chapter 6: Flight Controls › Flight Control Systems › Primary Flight Controls

    Flight Control Systems Flight Controls Aircraft flight control systems consist of primary and secondary systems. The ailerons, elevator (or stabilator), and rudder constitute the primary control system and are required to control an aircraft safely during flight. Wing flaps, leading ... edge devices, spoilers, and trim systems constitute the secondary control system and improve the performance characteristics of the airplane or relieve the pilot of excessive control forces. Primary Flight Controls Aircraft control systems are carefully designed to provide adequate responsiveness…

  • Chapter 6: Flight Controls › Flight Control Systems › Trim Tabs

    nose to move up. In spite of the opposing directional movement of the trim tab and the elevator, control of trim is natural to a pilot. If the pilot needs to exert constant back pressure on a control column ... indicated. The normal trim procedure is to continue trimming until the aircraft is balanced and the nose-heavy condition is no longer apparent. Pilots normally establish the desired power, pitch attitude, and configuration first, and then trim the aircraft…