PL.VI.B.S5
SkillMaintain altitude ±200 feet and specified heading ±10° throughout the operation. Achieve and maintain targeted airspeed ±10 knots.
From the FAA library
- Chapter 8: Flight Instruments › Altimeter Operation
altimeter indicates an altitude above the actual field elevation. If the barometric pressure setting is reset to the current altimeter setting of 29.68 "Hg, then the field elevation is again indicated on the altimeter. This pressure change ... easily noticed in flight since aircraft fly at specific altitudes. The aircraft steadily decreases true altitude while the altimeter is held constant through pilot action as discussed in the previous section. Knowing the aircraft’s altitude is vitally important…
- Chapter 5: Aerodynamics of Flight › Thrust
vectors during a stabilized climb. Likewise, if the engine power is increased, thrust becomes greater than drag and the airspeed increases. As long as the thrust continues to be greater than the drag, the aircraft continues to accelerate. When drag ... equals thrust, the aircraft flies at a constant airspeed. Straight-and-level flight may be sustained at a wide range of speeds. The pilot coordinates AOA and thrust in all speed regimes if the aircraft is to be held…
- Chapter 4: Principles of Flight › Pressure › Density Altitude
Density Altitude SDP is a theoretical pressure altitude, but aircraft operate in a nonstandard atmosphere and the term density altitude is used for correlating aerodynamic performance in the nonstandard atmosphere. Density altitude is the vertical distance above sea level ... propeller is less efficient in thin air • Lift because the thin air exerts less force on the airfoils Density altitude is pressure altitude corrected for nonstandard temperature. As the density of the air increases (lower density altitude), aircraft performance increases…
- Chapter 8: Flight Instruments › Types of Altitude
Indicated altitude—read directly from the altimeter (uncorrected) when it is set to the current altimeter setting. 2. True altitude—the vertical distance of the aircraft above sea level—the actual altitude. It is often expressed as feet above mean ... level (MSL). Airport, terrain, and obstacle elevations on aeronautical charts are true altitudes. 3. Absolute altitude—the vertical distance of an aircraft above the terrain, or above ground level (AGL). 4. Pressure altitude—the altitude indicated when the altimeter setting…
- Chapter 11: Aircraft Performance › Density Altitude
Density Altitude The more appropriate term for correlating aerodynamic performance in the nonstandard atmosphere is density altitude—the altitude in the standard atmosphere corresponding to a particular value of air density. Density altitude is pressure altitude corrected for nonstandard temperature ... density of the air increases (lower density altitude), aircraft performance increases. Conversely, as air density decreases (higher density altitude), aircraft performance decreases. A decrease in air density means a high density altitude; an increase in air density means a lower…
- Glossary › Pilot’s Operating Handbook/Airplane Flight Manual
pilot of any malfunction in the navigation system. This system is required for IFR-certified GPS units. Recommended altitude. An altitude depicted on an instrument approach chart with the altitude value neither underscored nor overscored. The depicted value ... Reduced vertical separation minimum (RVSM). Reduces the vertical separation between flight levels (FL) 290 and 410 from 2,000 feet to 1,000 feet, and makes six additional FLs available for operation. Also see DRVSM. Reference circle (also, distance circle…