PL.X.B.R8

From the FAA library

• Instrument Flying Handbookp. 7-43
  Chapter 7, Section II: Airplane Basic Flight Maneuvers › Airspeed Changes in Straight-and-Level Flight › Trim Technique

  desired performance is achieved, fly hands off. If additional trimming is required, redo the trimming steps. An aircraft is trimmed for a specific airspeed, not pitch attitude or altitude. Any time an aircraft changes airspeed, there is a need ... change, the trim is not adjusted properly and the altitude varies until the airspeed for which the aircraft is trimmed is achieved…

• Instrument Flying Handbookp. 6-19
  Chapter 6, Section II: Airplane Attitude Instrument Flying › Learning Methods › Establish

  Performance instruments. Figure 6-27. Navigation instruments. Trim Another important step in attitude instrument flying is trimming the aircraft. Trim is utilized to eliminate the need to apply force to the control yoke in order to maintain the desired attitude ... When the aircraft is trimmed appropriately, the pilot is able to relax pressure on the control yoke and momentarily divert attention to another task at hand without deviating from the desired attitude. Trimming the aircraft is very important, and poor…

• Instrument Flying Handbookp. 4-8
  Chapter 4: Aerodynamic Factors › Trim

  causes the main control surface to be deflected to a position that corrects the unbalanced condition of the aircraft. Because the trim tabs use airflow ... function, trim is a function of speed. Any change in speed results in the need to re-trim the aircraft. An aircraft properly trimmed in pitch seeks to return to the original speed before the change. It is very important…

• Instrument Flying Handbookp. 7-58
  Chapter 7, Section II: Airplane Basic Flight Maneuvers › Turns › Common Errors Leading to Unusual Attitudes

  pilot’s situational awareness and lead to unusual attitudes. 1. Improper trimming techniques. A failure to keep the aircraft trimmed for level flight at all times can turn a momentary distraction into an emergency situation if the pilot stops cross…

• Instrument Flying Handbookp. 6-8
  Chapter 6, Section I: Airplane Attitude Instrument Flying › Attitude Indicator › Airplane Trim

  degree of flying skill, which ultimately develops, depends largely upon how well the aviator learns to keep the aircraft trimmed. Airplane Trim An airplane is correctly trimmed when it is maintaining a desired attitude with all control pressures neutralized ... Then, the trim is adjusted so that the aircraft maintains that attitude when flight controls are released. The aircraft is trimmed for coordinated flight by centering the ball of the turn-and-slip indicator. • Moving the rudder trim…