Tutor Platform

PL.XI.C.S7

Skill

Consider a powerplant restart and, if appropriate, demonstrate the powerplant restart procedures in accordance with the manufacturer or operator specified procedures and checklists.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

Sign in to generate a study note

From the FAA library

  • Chapter 6: Threat and Error Management › Defenses Provided to the Pilot or Crew › Checklists, Standard Operating Procedures, and Best Practices

    different strategies and defenses to manage risk while in the air. Defenses Provided to the Pilot or Crew A manufacturer, employer, or a flight school may provide defenses to pilots. Examples include checklists, operating limitations, minimum pilot qualifications, standard operating ... procedures, and insurance requirements. Regardless of the flight mission, some defenses will always be predetermined. Checklists, Standard Operating Procedures, and Best Practices Like the aircraft, its approved checklists are normally provided. The manufacturer’s approved checklists, placards, and emergency procedures…

  • Chapter 9: Flight Manuals and Other Documents › Minimum Equipment Lists (MEL) and Operations With Inoperative Equipment

    Complex maintenance tasks require a certificated and appropriately rated maintenance person to perform the deactivation. In all cases, the item or equipment must be placarded INOPERATIVE. All small rotorcraft, non-turbine powered airplanes, gliders, or lighter-than-air aircraft operated ... eligible to use the maintenance deferral provisions of 14 CFR, part 91, section 91.213(d). However, once an operator requests an MEL, and a Letter of Authorization (LOA) is issued by the FAA, then the use of the MEL becomes…

  • Chapter 14: Airport Operations › Collision Avoidance › Clearing Procedures

    Clearing Procedures The following procedures and considerations are in place to assist pilots in collision avoidance under various situations: • Before takeoff—prior to taxiing onto a runway or landing area in preparation for takeoff, pilots should scan the approach area ... possible landing traffic, executing appropriate maneuvers to provide a clear view of the approach areas. • Climbs and descents—during climbs and descents in flight conditions that permit visual detection of other traffic, pilots should execute gentle banks left and right…

  • Chapter 14: Airport Operations › Radio Communications › Lost Communication Procedures

    Using Proper Radio Procedures Using proper radio phraseology and procedures contribute to a pilot’s ability to operate safely and efficiently in the airspace system. A review of the Pilot/Controller Glossary contained in the AIM assists a pilot ... understanding of standard terminology. The AIM also contains many examples of radio communications. Figure 14-40. Traffic pattern operation—parallel runways. ICAO has adopted a phonetic alphabet that should be used in radio communications. When communicating with ATC, pilots should…

  • Glossary › Pilot’s Operating Handbook/Airplane Flight Manual

    pilot in command. Pilotage. Navigation by visual reference to landmarks. Pilot in command (PIC). The pilot responsible for the operation and safety of an aircraft. Pilot report (PIREP). Report of meteorological phenomena encountered by aircraft. Pilot’s Operating Handbook/Airplane Flight ... Manual (POH/AFM). FAA-approved documents published by the airframe manufacturer that list the operating conditions for a particular model of aircraft. PIREP. See pilot report. Pitot pressure. Ram air pressure used to measure airspeed. Pitot-static head. A combination pickup…

  • Chapter 9: Flight Manuals and Other Documents

    Chapter Summary Flight instruments enable an aircraft to be operated with maximum performance and enhanced safety, especially when flying long distances. Manufacturers provide the necessary flight instruments, but to use them effectively, pilots need to understand how they operate ... pilot, it is important to become very familiar with the operational aspects of the pitot-static system and associated instruments, the vacuum system and associated instruments, the gyroscopic instruments, and the magnetic compass. Chapter 9: Flight Manuals and Other Documents…