UA.I.B.K19
KnowledgeFlight restrictions in the proximity of certain areas designated by notice to airmen (NOTAM).
From the FAA library
- Chapter 2: Airspace Classification, Operating Requirements, and Flight Restrictions › Restricted Areas
Prohibited Areas Restricted Areas Warning areas Military operation areas (MOAs) Alert areas Controlled firing areas (CFAs) Prohibited Areas Prohibited areas contain airspace of defined dimensions within which the flight of aircraft is prohibited. Such areas are established for security ... other reasons associated with the national welfare. These areas are published in the Federal Register and are depicted on aeronautical charts. The area is charted as a “P” followed by a number (e.g., P-40). Examples of prohibited areas include…
- Chapter 6: Flight Controls › Flight Control Systems › Primary Flight Controls
Flight Control Systems Flight Controls Aircraft flight control systems consist of primary and secondary systems. The ailerons, elevator (or stabilator), and rudder constitute the primary control system and are required to control an aircraft safely during flight. Wing flaps, leading ... control system and improve the performance characteristics of the airplane or relieve the pilot of excessive control forces. Primary Flight Controls Aircraft control systems are carefully designed to provide adequate responsiveness to control inputs while allowing a natural feel…
- Chapter 2: Airspace Classification, Operating Requirements, and Flight Restrictions › o Hydrography
Visual Flight Rules (VFR) Terms & Symbols Remote pilots need to be familiar with the following information from the FAA Aeronautical Chart User’s Guide website: All information on the VFR Terms tab The following sections under “VFR Aeronautical Chart Symbols ... Symbols tab: o Airports o Airspace Information o Navigational and Procedural Information o Chart Limits o Culture o Relief Notices to Airmen (NOTAMs) o Hydrography o Relief Notices to Airmen (NOTAMs) Notices to Airmen, or NOTAMs, are time-critical aeronautical…
- Chapter 15: Airspace › Special Use Airspace › Restricted Areas
Prohibited Areas Prohibited areas contain airspace of defined dimensions within which the flight of aircraft is prohibited. Such areas are established for security or other reasons associated with the national welfare. These areas are published in the Federal Register ... depicted on aeronautical charts. The area is charted as a “P” followed by a number (e.g., P-40). Examples of prohibited areas include Camp David and the National Mall in Washington, D.C., where the White House and the Congressional buildings…
- Chapter 2: Airspace Classification, Operating Requirements, and Flight Restrictions › Military Operation Areas (MOAs)
Military Operation Areas (MOAs) MOAs consist of airspace with defined vertical and lateral limits established for the purpose of separating certain military training activities from IFR traffic. Whenever an MOA is being used, nonparticipating IFR traffic may be cleared through ... separation can be provided by ATC. Otherwise, ATC reroutes or restricts nonparticipating IFR traffic. MOAs are depicted on sectional, VFR terminal area, and en route low altitude charts and are not numbered (e.g., “Camden Ridge MOA”). [Figure 2-5] However…
- Chapter 6: Flight Controls
Chapter Summary In order to sustain an aircraft in flight, a pilot must understand how thrust, drag, lift, and weight act on the aircraft. By understanding the aerodynamics of flight, how design, weight, load factors, and gravity affect an aircraft ... during flight maneuvers from stalls to high speed flight, the pilot learns how to control the balance between these forces. For information on stall speeds, load factors, and other important aircraft data, always consult the AFM/POH for specific information pertaining…