Remote Pilot – Small Unmanned Aircraft Systems › I. Regulations › Task F. Remote Identification (RID)

UA.I.F.K1

Knowledge

Standard remote identification.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

14 CFR Part 89 — Remote Identification of Unmanned Aircraft Open
14 CFR § 89.110 Operation of standard remote identification unmanned aircraft.
Operation of standard remote identification unmanned aircraft. Unless otherwise authorized by the Administrator, a person may comply with the remote identification requirement of § 89.105 by operating a standard remote identification unmanned aircraft under the following conditions: (a) Operational requirements ... person may operate a standard remote identification unmanned aircraft only if the person operating the standard remote identification unmanned aircraft ensures that all of the following conditions are met: (1) From takeoff to shutdown, the standard remote identification unmanned aircraft…
14 CFR Part 89 — Remote Identification of Unmanned Aircraft Open
14 CFR § 89.305 Minimum message elements broadcast by standard remote identification unmanned aircraft.
Minimum message elements broadcast by standard remote identification unmanned aircraft. A standard remote identification unmanned aircraft must be capable of broadcasting the following remote identification message elements: (a) The identity of the unmanned aircraft, consisting of: (1) A serial number ... assigned to the unmanned aircraft by the person responsible for the production of the standard remote identification unmanned aircraft; or (2) A session ID. (b) An indication of the latitude and longitude of the control station. (c) An indication…
14 CFR Part 89 — Remote Identification of Unmanned Aircraft Open
14 CFR § 89.310 Minimum performance requirements for standard remote identification unmanned aircraft.
Minimum performance requirements for standard remote identification unmanned aircraft. A standard remote identification unmanned aircraft must meet the following minimum performance requirements: (a) Control station location. The location of the control station of the unmanned aircraft must be generated…
14 CFR Part 89 — Remote Identification of Unmanned Aircraft Open
14 CFR § 89.515 Production requirements for unmanned aircraft without design approval or production approval issued under part 21 of this chapter.
United States unless— (a) The unmanned aircraft is designed and produced to meet the minimum performance requirements for standard remote identification unmanned aircraft established in § 89.310 in accordance with an FAA-accepted means of compliance ... Inspection requirements for production of standard unmanned aircraft. A person responsible for the production of standard remote identification unmanned aircraft must, upon request, allow the Administrator to inspect the person's facilities, technical data, and any standard remote identification unmanned…