Remote Pilot – Small Unmanned Aircraft Systems › I. Regulations › Task F. Remote Identification (RID)

UA.I.F.K7

Knowledge

Product labeling.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Small Unmanned Aircraft System (Small UAS)p. 8-29
CHAPTER 8. SMALL UNMANNED AIRCRAFT OVER PEOPLE › 8.11 Product Labeling
Product Labeling 8.11.1 Category 1. The FAA does not require labeling of small unmanned aircraft eligible for Category 1 operations. Marking the retail packaging with the weight of the aircraft, or with a general statement that the aircraft weighs…
Small Unmanned Aircraft System (Small UAS)p. 8-4
CHAPTER 8. SMALL UNMANNED AIRCRAFT OVER PEOPLE › 8.3 Operations Over People › 8.3.6 Category 3 Operations
label indicating eligibility to conduct Category 2 operations; have current remote pilot operating instructions that apply to the operation of the small unmanned aircraft, which are described below in paragraph 8.12; and be subject to a product support and notification…
14 CFR Part 89 — Remote Identification of Unmanned Aircraft Open
14 CFR § 89.110 Operation of standard remote identification unmanned aircraft.
Operation of standard remote identification unmanned aircraft. Unless otherwise authorized by the Administrator, a person may comply with the remote identification requirement of § 89.105 by operating a standard remote identification unmanned aircraft under the following conditions: (a) Operational requirements ... person may operate a standard remote identification unmanned aircraft only if the person operating the standard remote identification unmanned aircraft ensures that all of the following conditions are met: (1) From takeoff to shutdown, the standard remote identification unmanned aircraft…
14 CFR Part 89 — Remote Identification of Unmanned Aircraft Open
14 CFR § 89.520 Production requirements for remote identification broadcast modules.
Production requirements for remote identification broadcast modules. After April 21, 2021, no person may produce remote identification broadcast modules unless: (a) The remote identification broadcast module is designed and produced to meet the minimum performance requirements for remote identification broadcast ... accepted means of compliance; and (b) All of the following conditions are met: (1) Inspection requirements for production of remote identification broadcast modules. A person responsible for the production of remote identification broadcast modules must, upon request, allow the Administrator…
14 CFR Part 89 — Remote Identification of Unmanned Aircraft Open
14 CFR § 89.320 Minimum performance requirements for remote identification broadcast modules.
Minimum performance requirements for remote identification broadcast modules. Remote identification broadcast modules must meet the following minimum performance requirements: (a) Take-off location. The remote identification broadcast module must be capable of determining the take-off location of the unmanned ... aircraft. (b) Time mark. The time mark message element must be synchronized with all other remote identification message elements. (c) Self-testing and monitoring. (1) Prior to take-off, the remote identification broadcast module must automatically test the remote identification…
14 CFR Part 89 — Remote Identification of Unmanned Aircraft Open
14 CFR § 89.115 Alternative remote identification.
Alternative remote identification. A person operating an unmanned aircraft that is not a standard remote identification unmanned aircraft may comply with the remote identification requirement of § 89.105 by meeting all of the requirements of either paragraph ... this section. (a) Remote identification broadcast modules. Unless otherwise authorized by the Administrator, a person may operate an unmanned aircraft that is not a standard remote identification unmanned aircraft if all of the following conditions are met: (1) Equipage…