Remote Pilot – Small Unmanned Aircraft Systems › V. Operations › Task A. Radio Communications Procedures

UA.V.A.K8

Knowledge

Phraseology: altitudes, directions, speed, and time.

Study note

Get a short, cited explanation of this element written from the FAA handbooks: the core idea, the numbers that matter, common test traps, and a quick self-check.

From the FAA library

Aeronautical Information Manual p. 5-2-13
Chapter 5. Air Traffic Procedures › Section 2. Departure Procedures › 5-2-9. Instrument Departure Procedures (DP) - Obstacle Departure Procedures (ODP), Stan…
vectored off of an ODP, or issued an altitude lower than a published altitude on an ODP, at which time the ODP is canceled. In these cases, ATC assumes responsibility for terrain and obstacle clearance. In all cases, the minimum ... which contains speed and/or altitude restrictions, must be: (a) Issued/reissued all applicable restrictions, or (b) Advised to “Climb via SID” or resume published speed. EXAMPLE- “Resume the Solar One departure, Climb via SID.” “Proceed direct CIROS, resume the Solar…
Aeronautical Information Manual p. 4-4-9
Chapter 4. Air Traffic Control › Section 4. ATC Clearances and Aircraft Separation › 4-4-12. Speed Adjustments
determines (before an approach clearance is issued) that it is no longer necessary to apply speed adjustment procedures, they will: 1. Advise the pilot to “resume normal speed.” Normal speed is used to terminate ATC assigned speed adjustments on segments ... where no published speed restrictions apply. It does not cancel published restrictions on upcoming procedures. This does not relieve the pilot of those speed restrictions which are applicable to 14 CFR section 91.117. EXAMPLE- (An aircraft is flying…
Aeronautical Information Manual p. 5-5-5
Chapter 5. Air Traffic Procedures › Section 5. Pilot/Controller Roles and Responsibilities › 5-5-9. Speed Adjustments
When complying with speed adjustment assignments, maintains an indicated airspeed within plus or minus 10 knots or 0.02 Mach number of the specified speed. b. Controller. 1. Assigns speed adjustments to aircraft when necessary but not as a substitute ... vectoring technique. 2. Adheres to the restrictions published in FAA Order JO 7110.65, Air Traffic Control, as to when speed adjustment procedures may be applied. 3. Avoids speed adjustments requiring alternate decreases and increases. 4. Assigns speed adjustments…
Aeronautical Information Manual p. 5-2-5
Chapter 5. Air Traffic Procedures › Section 2. Departure Procedures › 5-2-7. Departure Restrictions, Clearance Void Times, Hold for Release, and Release Times
Departure Restrictions, Clearance Void Times, Hold for Release, and Release Times a. ATC may assign departure restrictions, clearance void times, hold for release, and release times, when necessary, to separate departures from other traffic or to restrict or regulate ... from an airport without an operating control tower must be issued either a departure release (along with a release time and/or void time if applicable), or a hold for release. 1. Clearance Void Times. A pilot may receive a clearance…