UA.V.C.K4
KnowledgeLoss of Global Positioning System (GPS) signal during flight and potential consequences.
From the FAA library
- Chapter 6: Flight Controls › Flight Control Systems › Primary Flight Controls
Flight Control Systems Flight Controls Aircraft flight control systems consist of primary and secondary systems. The ailerons, elevator (or stabilator), and rudder constitute the primary control system and are required to control an aircraft safely during flight. Wing flaps, leading ... edge devices, spoilers, and trim systems constitute the secondary control system and improve the performance characteristics of the airplane or relieve the pilot of excessive control forces. Primary Flight Controls Aircraft control systems are carefully designed to provide adequate responsiveness…
- Chapter 6: Flight Controls › Autopilot
Three different servos actuate ailerons, elevator, and rudder. More advanced systems often include a vertical speed and/or indicated airspeed hold mode. Advanced autopilot systems are coupled to navigational aids through a flight director. Figure 6-22. A ground adjustable ... Some aircraft, including most jet transports, use an adjustable stabilizer to provide the required pitch trim forces. The autopilot system also incorporates a disconnect safety feature to disengage the system automatically or manually. These autopilots work with inertial navigation systems…
- Chapter 6: Flight Controls
addition, in some large and fast aircraft, controls are boosted by hydraulically or electrically actuated systems. In both the fly-by-wire and boosted controls, the feel of the control reaction is fed back to the pilot by simulated means ... Current research at the National Aeronautics and Space Administration (NASA) Dryden Flight Research Center involves Intelligent Flight Control Systems (IFCS). The goal of this project is to develop an adaptive neural network-based flight control system. Applied directly to flight…
- Chapter 7: Aircraft Systems › Heating System › Exhaust Heating Systems
Exhaust Heating Systems Exhaust heating systems are the simplest type of aircraft heating system and are used on most light aircraft. Exhaust heating systems are used to route exhaust gases away from the engine and fuselage while reducing engine noise ... exhaust systems also serve as a heat source for the cabin and carburetor. The risks of operating an aircraft with a defective exhaust heating system include carbon monoxide poisoning, a decrease in engine performance, and an increased potential for fire…
- Appendix B: Acronyms, Abbreviations, and NOTAM Contractions
federal FEIS—Final Environmental Impact Statement FEP—front end processor FFAC—from facility FI/P—flight inspection permanent FI/T—flight inspection temporary FIFO—Flight Inspection Field Office FIG—flight inspection group FINO—Flight Inspection National Field Office FIPS—federal information publication ... standard FIR—flight information region FIRE—fire station FIRMR—Federal Information Resource Management Regulation FL—flight level FLOWSIM—traffic flow planning simulation FM—from FMA—final monitor aid FMF—facility master file FMIS—FTS2000 management information system FMS—flight management…
- Chapter 16: Navigation › Angle of Intercept › Global Positioning System
tracking to the station, but the ADF needle points toward the tail of the aircraft or the 180° position on the azimuth dial. Attempting to keep the ADF needle on the 180° position during winds results in the aircraft flying ... curved flight leading further and further from the desired track. When tracking outbound, corrections for wind should be made in the direction opposite of that in which the needle is pointing. Although the ADF is not as popular…